Did you recently use a pressure washer to clean your deck or wash out your eaves troughs? If so, then you might be interested to know that your household pressure washer can be yet another valuable tool. If you have been experiencing sluggish drains, you may not need to call a plumber to address the problem; you may be able to fix it on your own by using your pressure washer to clean your drains.

Using Add-Ones Hydro Jetting Services Bellmore

Pressure washers usually have different add-ons which can be purchased to enhance the versatility of a unit. For example, you can purchase accessories which help to increase the pressure of the water flowing through the end of the washer. Or, you can buy an extension that allows you to reach high places like eaves troughs or the top of a large vehicle like a camper van for effective cleaning.

Pressure Differences

Smaller pressure washing units can effectively clean household drains, as they operate at around 2,500 psi. But sometimes, this is not enough. Most experts recommend that, if you are going to be cleaning the drains in your home that you invest in a larger, more industrial-sized washer that’s been designed to clean lines in the sewer. These washers emit water at a pressure of between 2,500 to 4,000 psi. This allows you to effectively take on household drain blockage issues, as well as any which may occur in the larger water and sewer lines which flow from your home.

Larger pressure washers have flow rates from three to twenty gallons per minute, as well as nozzles more suited to enter and clean drains. As well, the hose lengths of industrial pressure washers are longer, reaching up to six hundred feet. This allows them to be used in virtually any application.

Burst Ratings

The high-pressure hoses that most of today’s drain cleaners use include something called a burst rating. This rating indicates at what pressure a drain cleaner’s hose will burst. However, most of these hoses are stronger than their burst rating, some as many as four times the strength. Although this is for safety reasons, when purchasing a pressure washer, it is recommended that you choose one whose hose is rated higher than the psi of the actual machine.

Hose Types

Types of hoses for pressure washers come in two main sizes, which are single and double-braided. Each type is covered with either a thermo-plastic or rubber material, with the latter representing the highest quality. For the three to four thousand psi range, a single braided hose is common. Pressures greater than four thousand psi will see double-braiding in hoses being common.

 

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *